User Guide

System management Product description
1-20
pmp-0047 (December 2012)
• Statistics: The Statistics web-page reports detailed operating statistics for the scheduler, SM registration
failures, bridge control block, bridging table, Ethernet, radio, VLAN, data VC, throughput, filter, ARP,
overload, DHCP relay, pass through, and DNS.
• Tools: The Tools web-page offers useful tools for device installation, configuration, and operation including
link capacity test, frame calculator, subscriber configuration, link status, remote spectrum analyzer, sessions,
and DNS test.
• Logs: The Logs web-page displays logs related to device operation including AP sessions, AP authentication
state machine, AP authorization state machine, and EAP Radius.
• Accounts: These web-pages are used to configure device user accounts.
• Quick Start: The Quick Start web-page provides a walkthrough of configuring radio parameters for initial
operation.
• Copyright: The Copyright web-page displays pertinent device copyright information.
Subscriber Module web-pages:
• Home: The Home web-page reports the general device status, event log information, network interface status,
and layer 2 neighbor information.
• Configuration: The Configuration web-page may be utilized for configuring general device parameters, as
well as IP, radio, SNMP, Quality of Service (QoS), security, VLAN, DiffServ, protocol filtering, NAT, PPPoE,
NAT port mapping, and unit settings.
• Statistics: The Statistics web-page reports detailed operating statistics for the scheduler, bridge control block,
bridging table, translation table, Ethernet, radio, VLAN, data VC, filter, NAT, NAT DHCP, ARP, overload,
PPPoE, peer information, and DNS.
• Tools: The Tools web-page offers useful tools for device installation, configuration, and operation including a
spectrum analyzer, alignment configuration and tool, link capacity test, AP evaluation, frame calculator, BER
results, link status, and DNS test.
• Logs: The Logs web-page displays logs related to device operation including the NAT table, SM session, SM
authentication, SM authorization, PPPoE session, and EAP Radius.
• Accounts: These web-pages are used to configure device user accounts.
• PDA: The PDA web-page includes 320 x 240 pixel formatted displays of information important to installation
and alignment for installers using legacy PDA devices. All device web pages are compatible with touch
devices such as smart phones and tablets.
• Copyright: The Copyright web-page displays pertinent device copyright information.
Identity-based user accounts
When identity-based user accounts are configured, a security officer can define from one to four user accounts, each
of which may have one of the four possible roles:
• ADMINISTRATOR, who has full read and write permissions. This is the level of the root and admin users,
as well as any other administrator accounts that one of them creates.
• INSTALLER, who has permissions identical to those of ADMINISTRATOR except that the installer cannot
add or delete users or change the password of any other user.
• TECHNICIAN, who has permissions to modify basic radio parameters and view informational web pages