User Guide

Compliance with radio regulations Reference information
4-16
pmp-0047 (December 2012)
Country Codes and available spectrum
Table 38 lists the Country Codes available on PMP 450 AP and SM units. Country Code settings affect the radios
in the following ways:
• Maximum transmit power limiting (based on radio transmitter power plus configured antenna gain)
• DFS operation is enabled based on the configured region code, if applicable
PMP 450 equipment shipped to the United States is locked to a Country Code setting of “United States”. Units
shipped to regions other than the United States must be configured with the corresponding Country Code to comply
with local regulatory requirements.
Table 38 Center channel details based on Country Code setting
OFDM
Radio
Model
Country Channel
Size
Band
Edges
(MHz)
Range of
Center
Frequencies
Available
(MHz)
Center
Channel
Spacing
# of
Center
Channels
(based on
PMP 450
available
range,
weather
notch-
out)
PMP
450
Series
AP, 5.4-
GHz
Brazil
10 MHz
5470 – 5725
5475 – 5720 5 MHz 50
20 MHz 5480 – 5715 5 MHz 48
Australia,
Denmark,
10 MHz
5470 – 5600;
5650 - 5725
5475 – 5595;
5655 - 5720†
5 MHz 39
†
Frequencies 5600 – 5650 MHz are excluded, as ten minute Channel Availability Check is required