User Guide

Table Of Contents
PMP 450 Planning Guide Equipment specifications
pmp-0047 (December 2012)
4-5
Category Specification
Physical Layer 2x2 MIMO OFDM
Ethernet Interface 10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, SNMP, HTTP, FTP, RADIUS
Network
Management
HTTP, FTP, SNMP v2c, Syslog
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority, dynamic port VID
Performance
Maximum
Deployment Range
Up to 40 km (25 mi)
ARQ Yes
Cyclic Prefix 1/16
Modulation Levels
(Adaptive)
OFDM: 1x = QPSK, 2x = QPSK-MIMO-B, 4x = 16-QAM-MIMO-B, 6x = 64-
QAM-MIMO-B
Latency 5 - 7 ms
GPS Synchronization Yes
Quality of Service Diffserv QoS
Link Budget
Antenna Beam Width
55º azimuth, 55º elevation (both horizontal and vertical)
Combined Transmit
Power
-30 to +22 dBm (to EIRP limit by region)
Antenna Gain 9 dBi H+V, integrated patch
Maximum Transmit
Power
22 dBm combined
Reflector Gain +14 dBi
LENS Gain +5.5 dBi
Physical
Wind Loading 190 km/hour (118 mi/hour)
Environmental IP55
Temperature
-40ºC to +55ºC (-40ºF to +131ºF)