User's Guide
Table Of Contents
- PTP 250 User Guide
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1: Product description
- Chapter 2: Planning considerations
- Chapter 3: Legal information
- Chapter 4: Reference information
- Chapter 5: Installation
- Chapter 6: Configuration and alignment
- Chapter 7: Operation
- Chapter 8: Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance in the ODU cable
- Testing the radio link
- Testing link end hardware
- Glossary
Ordering components Chapter 2: Planning considerations
2-24
UNDER DEVELOPMENT
phn-2182_003v004 (Oct 2011)
Ordering components
This section describes describes how to select components for a planned PTP 250 link (as
an alternative to PTP LINKPlanner). It specifies Motorola part numbers for PTP 250
components.
PTP 250 kits
The PTP 250 is supplied as a 'Link' or an 'End' kit. A ‘Link’ kit contains components for
both ends of a link (including two ODUs and two PoE power supply units). An 'End' kit
contains components for one end of a link (including one ODU and one PoE power supply).
The kits may contain either integrated ODUs (antennas included) or connectorized ODUs
(separate antennas must be purchased).
PTP 250 kits are supplied in two regional variants: one is for use in countries where FCC
or IC licensing restrictions apply (the USA and Canada), and the other is for use in ETSI
countries or the rest of the world (ETSI/RoW). Table 2-8 c
ontains part numbers for all kit
variants. Table 2-9 lists PTP 250 kit com
ponents.
Table 2-8 PTP 250 kit part numbers
Frequency
variant
Regional
variant
Integrated or
Connectorized
Link or
End Complete
Part
number
5.4 / 5.8 GHz ETSI/RoW Integrated Link Complete WB3716
5.4 / 5.8 GHz ETSI/RoW Integrated End Complete WB3717
5.4 / 5.8 GHz ETSI/RoW Connectorized Link Complete WB3718
5.4 / 5.8 GHz ETSI/RoW Connectorized End Complete WB3719
5.4 / 5.8 GHz FCC/IC Integrated Link Complete WB3720
5.4 / 5.8 GHz FCC/IC Integrated End Complete WB3721
5.4 / 5.8 GHz FCC/IC Connectorized Link Complete WB3722
5.4 / 5.8 GHz FCC/IC Connectorized End Complete WB3723