User's Guide
Table Of Contents
- PTP 250 User Guide
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1: Product description
- Chapter 2: Planning considerations
- Chapter 3: Legal information
- Chapter 4: Reference information
- Chapter 5: Installation
- Chapter 6: Configuration and alignment
- Chapter 7: Operation
- Chapter 8: Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance in the ODU cable
- Testing the radio link
- Testing link end hardware
- Glossary
PTP 250 User Guide Web-based management
phn-2182_003v004 (Oct 2011)
UNDER DEVELOPMENT
7-13
Attribute Meaning
Transmit Data Rate The maximum, mean, minimum and latest measurements of
Transmit Data Rate (Mbps). See Diagnostics calculated over time
on page 7-23.
Receive Data Rate The maximum, mean, minimum and latest measurements of
Receive Data Rate (Mbps). See Diagnostics calculated over time
on page 7-23.
Transmit
Modulation Mode
The modulation mode currently being used on the transmit
channel.
Receive Modulation
Mode
The modulation mode currently being used on the receive
channel.
Noise Floor The noise floor reported by the radio in this unit (dBm).
Range The distance (km) between the two ODUs.