User's Guide
Table Of Contents
- PTP 250 User Guide
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1: Product description
- Chapter 2: Planning considerations
- Chapter 3: Legal information
- Chapter 4: Reference information
- Chapter 5: Installation
- Chapter 6: Configuration and alignment
- Chapter 7: Operation
- Chapter 8: Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance in the ODU cable
- Testing the radio link
- Testing link end hardware
- Glossary
PTP 250 User Guide
phn-2182_003v004 (Oct 2011)
UNDER DEVELOPMENT
7-1
Chapter 7: Operation
This chapter provides instructions for operators of the PTP 250 web user interface.
The following topics are described in this chapter:
• Web-based management on
page 7-2 describes the layout and the main menu options
of the PTP 250 web-based management interface.
• Managing link status and alerts on pa
ge 7-15 describes how to manage PTP 250 link
status and alerts.
• Managing performance on
page 7-17 describes how to manage the performance of the
PTP 250 link.
• Restoring, resetting and rebooting on
page 7-24 describes how to restore the system
configuration, reset to defaults, recover the IP address and reboot the unit.