User's Guide

PTP 250 User Guide Notifications
phn-2182_003v004 (Oct 2011)
UNDER DEVELOPMENT
4-15
5.8 GHz FCC and IC notification
This system has achieved Type Approval in various countries around the world. This means
that the system has been tested against various local technical regulations and found to
comply. The frequency band in which the system operates is ‘license exempt’ and the
system is allowed to be used provided it does not cause interference. Further, the licensing
authority does not guarantee protection against interference from other products and
installations.
For the connectorized version of the product and in order to reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the
Effective Isotropically Radiated Power (EIRP) is not more than that permitted for
successful communication.
Where necessary, the end user is responsible for obtaining any National licenses required
to operate this product and these must be obtained before using the product in any
particular country. Contact the appropriate national administrations for details on the
conditions of use for the bands in question and any exceptions that might apply.
U.S. Federal Communication Commission (FCC)
This device complies with part 15 of the US FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the US FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio-frequency energy and, if not installed
and used in accordance with these instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on and off, the user is
encouraged to correct the interference by one or more of the following measures:
• Increase the separation between the affected equipment and the unit;
• Connect the affected equipment to a power outlet on a different circuit from that which
the receiver is connected to;
• Consult the dealer and/or experienced radio/TV technician for help.