User's Manual

Installation inventories Chapter 4 Reference information
phn-2182_002v000
4-6
May 2011
Item Notes
Cable grounding kits
One kit is required per drop cable
grounding point.
‘Cable Grounding Kits For 1/4" And 3/8"
Cable’. Motorola part number
01010419001.
Kit contents: grounding cable, self-
amalgamating tape, PVC tape, tie-wraps,
bolts, washers and nuts.
Lightning Protection Unit (LPU) kits
Two kits are required per standard link.
‘LPU End Kit PTP 250/300/500’.
Motorola
part number WB2978D.
Kit contents: one LPU, one grounding
cable, nuts, bolts and two cable glands.
Cable ties, cable cleats For securing cables. Purchase separately.
Indoor CAT5e cable
CAUTION
The connected network equipment must
feature screened RJ45 connectors
and must be connected to ground,
otherwise the PoE power supply will not
be grounded.
To connect the PoE power supply to
network equipment, use screened cable
that meets this specification:
Screening: Must be either foil screen
(FTP) or braided screen (STP) cable.
Connectors: Must use screened RJ45
connectors with metal shells at both
ends.
Electrical connection: There must be
a continuous electrical connection
between both screened connectors.