User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
Installation inventories Chapter 4 Reference information
phn-2182_002v000
4-4
May 2011
Item Notes
Mounting bracket assembly
‘End Complete’ kit contains one bracket.
‘Link Complete’ kit contains two brackets.
Choice of mains leads (US, UK and
EU)
‘End Complete’ kit contains one US, one
UK and one EU lead.
‘Link Complete’ kit contains two US, two
UK and two EU leads.
Cable gland
‘End Complete’ kit contains one gland.
‘Link Complete’ kit contains two glands.
Reset plug
‘End Complete’ kit contains one switch.
‘Link Complete’ kit contains two switches.