User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
Chapter 2
phn-2182_002v000
May 2011
2-1
Chapter 2 Planning considerations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
This chapter provides information to help the user to plan a PTP 250 link.
The following topics are described in this chapter:
• Spectrum planning on
page 2-2 describes the regulatory restrictions that affect
radio spectrum usage, such as frequency range and radar avoidance.
• Site planning on
page 2-4 describes factors to be considered when choosing sites
for the ODU and PoE power supply.
• Link planning on page 2-8 describ
es factors to be taken into account when
planning links, such as range and path loss. Introduces the PTP LINKPlanner.
• Grounding and lightning protection on
page 2-11 describes the grounding and
lightning protection requirements of a PTP 250 installation.
• Data network planning on
page 2-21 describes factors to be considered when
planning PTP 250 data networks.