User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
Web-based management Chapter 7 Operation
phn-2182_002v000
7-2
May 2011
Web-based management
This section describes the layout and the main menu options of the PTP 250 web-based
management interface. The following topics are covered:
• Accessing the web interface on
page 7-2
• Using the menu options on
page 7-4
• Viewing the system summary on
page 7-6
• Viewing the system status on
page 7-8
• Changing password on
page 7-14
• Logging out on page 7-14
Accessing the web interface
The web interface is best viewed using a screen resolution of at least 1024 x 768
pixels. The web pages have been tested with: Internet Explorer 7, Internet Explorer 8,
Firefox 3 and Firefox 3.5 on PCs; and Safari on Mac OS X. Other browsers have not
been tested.
To access the web interface, type the IP address of the unit into the browser address
bar and press ENTER. When the login page is displayed (Figure 7-1), ente
r Username
‘admin’ and Password (factory default is ‘motorola’, but this must be changed at first
login) and select Login. The Menu and System Summary are displayed (Figure 7-2).
Figu
re 7-1 Login page