User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
Chapter 7
phn-2182_002v000
May 2011
7-1
Chapter 7 Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
This chapter provides instructions for operators of the PTP 250 web user interface.
The following topics are described in this chapter:
• Web-based management on
page 7-2 describes the layout and the main menu
options of the PTP 250 web-based management interface.
• Managing link status and alerts on pa
ge 7-15 describes how to manage PTP 250
link status and alerts.
• Managing performance on
page 7-17 describes how to manage the performance
of the PTP 250 link.
• Restoring, resetting and rebooting on
page 7-24 describes how to restore the
system configuration, reset to defaults, recover the IP address and reboot the
unit.