User's Guide Part 2

User Guide: PTP 600 Series Installing E1 and T1
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-55
Connecting the ODU to the E1/T1 cable
Perform this task to connect the ODU to the E1/T1 cable. It is often easier to carry out
this procedure on the ground or a suitable surface prior to mounting the ODU.
CAUTION
To prevent damage to the ODU while making or breaking the connection,
ensure that power is removed from the system at the PIDU Plus.
To connect the E1/T1 port of the ODU to the E1/T1 cable, proceed as follows:
Procedure 5-17 Connect the E1/T1 cable to the ODU
1
Prepare the ODU end of the E1/T1 cable as described in
Preparing the
supported Superior Essex cable
on page 5-8.
2
Connect the cable gland of the E1/T1 cable to the E1/T1 port of the ODU as
described in Connecting the drop cable to an ODU or LPU on page 5-16.
NOTE
If it is necessary to disconnect the E1/T1 cable from the ODU, refer to
Disconnecting the drop cable from an ODU or LPU on
page 5-18.