User's Guide Part 2

User Guide: PTP 600 Series Installing the UltraSync GPS receiver
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-23
Installing the UltraSync GPS receiver
Recommended kit
The UltraSync installation kit includes the following:
• GPS synchronization unit from MemoryLink (see Figure 5-7), with thr
ee attached
terminated Ethernet and sync cables and cable glands (2) which connect directly
to a PTP 600 Series ODU.
• Mounting bracket and mounting bracket bolts
• Outdoor rated UV resistant cable tie
• UltraSync user manual.
In addition to the hardware mentioned above, Motorola recommends the installation of
appropriate lightning protection with PTP LPUs, as described in Lightning protection
and E1/T1 on
page 5-57.
NOTE
Refer to the UltraSync user manual for details on the lengths of cables used
to connect the UltraSync to the ODU and PTP LPU.