User's Guide Part 2

User Guide: PTP 600 Series Cable connection procedures
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-17
3
Once the gland is fully hand screwed into the unit, tighten it with a spanner to
torque 10 Nm (7.37 ftlbs).
4
When the gland body has been fitted, tighten the gland back shell.
CAUTION
Do not over-tighten the gland back shell, as the internal seal and structure
may be damaged. Figure 5-4 shows correctly tightened and over-tightened
gland back shells.
Figure 5-4 Correct and incorrect tightening of cable gland back shell