User's Guide Part 2

Cable connection procedures Chapter 5 Installation
phn-0896_009v003
5-14
UNDER DEVELOPMENT
Feb 2010
6
Wrap a layer of PVC tape, starting from 25mm (1 inch) above the outer jacket and
finishing 25mm (1 inch) below the self-amalgating tape, over lapping at half width.
7
Repeat with a further four layers of PVC tape.
Start the second layer 25mm (1 inch) above the first layer tape, start the third layer
below the finish of the second layer. Continue until five layers have been applied,
always over lapping at half width.