User's Guide Part 2

User Guide: PTP 600 Series Checking the configuration
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-5
Checking software version
The software version installed on the unit may not be the latest one available from
Motorola. To check and update the software version, proceed as follows:
Procedure 5-4 Check software configuration
1
Select Status from the menu. The System Status page (
Figure 6-4) is
displayed.
2
Check that the Software Version attribute in the System Status page is the
same as the latest PTP 600 software version in
http://www.motorola.com/ptp/support
.
3
If it is not the latest, upgrade it as described in
Upgrading PTP 600
software
on page 6-84.
Checking region code
The unit is supplied with two alternative license keys, one of which is factory
configured. To check that the configured license key is for the required Region Code,
proceed as follows:
Procedure 5-5 Check region code
1
Select Status from the menu. The System Status page (
Figure 6-4) is
displayed.
2
Check that the required Region Code attribute is in the System Status page.
3
If it is not, replace the license key of the unit with the supplied alternative
license key, as described in
Entering a license key on page 6-80.