User's Guide Part 2

Chapter 5
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-1
Chapter 5 Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
This chapter provides instructions for installing a PTP 600 link.
CAUTION
Motorola recommends that only qualified personnel undertake the
installation of a PTP 600 Series solution.
Motorola recommends that the practices and procedures detailed in manual
R56 STANDARDS AND GUIDELINES FOR COMMUNICATION SITES
(68P81089E50)
should be applied to all new site build activities. This manual
is provided on the PTP 600 CD-ROM.
The PTP 600 Series installation procedure consists of the following tasks:
• Checking the configuration on pa
ge 5-2
• Preparing for site installation on p
age 5-7
• Cable connection procedures on
page 5-8
• Mounting the ODUs on
page 5-19
• Installing the UltraSync GPS receiver on
page 5-23
• Installing the GPS receiver for PTP-SYNC on
page 5-28
• Installing PTP-SYNC on
page 5-36
• Connecting the ODU, PIDU and LPUs on page 5-43
• Installing E1 and T1 on pa
ge 5-50
• Establishing a radio link on
page 5-59
If a connectorized PTP 600 variant is to be installed, see Chapter 8 Connectorized PTP
600 series.
Legal disclaimer
IN NO EVENT SHALL MOTOROLA, INC. BE LIABLE FOR ANY INJURY TO ANY
PERSONS OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE
MOTOROLA PTP 600 SERIES PRODUCT.