User's Guide Part 2

Managing security Chapter 6 Operation
phn-0896_009v003
6-106
UNDER DEVELOPMENT
Feb 2010
Table 6-11 HTTP and Telnet attributes
Attribute Meaning
HTTP Access Enabled When this is set to ‘No’, the unit will not respond to any
requests on the HTTP port. When this is set to ‘Yes’, the unit
will repond to requests on the HTTP port.
Remote management via HTTPS is not affected by this setting.
HTTP Port Number The port number for HTTP access. A value of zero means the
wireless unit uses the default port.
HTTPS Port Number The port number for HTTPS access. A value of zero means the
wireless unit uses the default port.
NOTE
HTTPS access is controlled by license key.
Telnet Access Enabled When this is set to ‘No’, the unit will not respond to any
requests on the Telnet port. When this is set to ‘Yes’, the unit
will repond to requests on the Telnet port.
Telnet Port Number The port number for Telnet access. A value of zero means the
wireless unit uses the default port.