User's Guide Part 2

Managing security Chapter 6 Operation
phn-0896_009v003
6-104
UNDER DEVELOPMENT
Feb 2010
Step 5: Enter the wireless link encryption key
The wireless link encryption key is used to encrypt all traffic over the PTP600 wireless
link.
To enter the wireless link encryption key via the Security Wizard, proceed as follows:
Procedure 6-15 Enter wireless link encryption key
1
The Step 5: Enter The Wireless Link Encryption Key page is displayed (
Figure 6-59).
2
Select the applicable value in the Encryption Algorithm field.
3
If a valid encryption key exists, then an SHA-1 thumbprint of the key is displayed. If
this key is correct, then take no action. Otherwise, enter the generated key in the
Wireless Link Encryption Key and Confirm Wireless Link Encryption Key fields. If the
two values are not identical, an error message is displayed.
4
Select Next.
Figure 6-59 Step 5: Enter The Wireless Link Encryption Key page