User's Guide Part 2

User Guide: PTP 600 Series Upgrading the PTP 600
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
6-83
Restoring the configuration file
Perform this task to restore the operational configuration of the unit.
Before starting this task, ensure that:
• The configuration file of the old (faulty) unit has been saved.
• The new (replacement) unit has been installed.
• The license key of the old unit has been entered in the new unit.
To restore the configuration file, proceed as follows:
Procedure 6-5 Restore configuration file
1
From the left hand menu, select Configuration, Save And Restore. The Save &
Restore Configuration page is displayed (Figure 6-44).
2
Select Browse and navigate to the PC folder containing the saved configuration file
(.cfg).
3
Select Restore Configuration File and Reboot.
4
Select OK to confirm the restore.
The configuration file is uploaded and used to reconfigure the new unit to the same
state as the old unit. On completion, the unit reboots.