User's Guide Part 2

Configuring the PTP 600 Chapter 6 Operation
phn-0896_009v003
6-42
UNDER DEVELOPMENT
Feb 2010
Configuring the IP and Ethernet interfaces
LAN configuration
The LAN configuration page (Figure 6-20) is used by the system administrator to
configure the PTP 600 Series LAN interface.
Figure 6-20 LAN Configuration page
All of the LAN Configuration attributes are non-volatile, so once set, they will be used
by the unit even after a power on reboot. The LAN Configuration page contains the
following fields:
IP Address
Internet protocol (IP) address. This address is used by the family of Internet protocols
to uniquely identify this unit on a network.