User's Guide Part 1

User Guide: PTP 600 Series Outdoor unit (ODU)
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
1-7
Mounting brackets
The ODU is supplied with a bracket for mounting it to a pole of 50mm (2”) to 75mm
(3”) in diameter. For more details on mounting, see Chapter 3
Th
e bracket allows for adjustment in both azimuth and elevation. The bracket may be
split to allow the pole mount section of the bracket to be mounted to the pole first.
This allows the installer to take the weight of the unit and secure it, one handed, with
a single mounting bolt.
• The PIDU can either be desk or wall mounted. The preference is wall mounted,
with the cables dressed to a cable channel. Wall mounting is achieved by
screwing through the mounting lugs on either side of the unit. Remember to
leave space for access to the Recovery button. See Section PIDU Plus PTP
300/500/60
0 Series on page 1-9.
Network connection
The network connection to a PTP 600 Series is made via a 1000BaseT Ethernet
connection. Power is provided to the ODU over the 1000BaseT Ethernet connection
using a patented non-standard powering technique.
Previous releases of the PTP 600 Series platform used different powering and
connection arrangements. Users of equipment prior to “Mod Record 1” should refer to
the User Guide shipped with the original equipment. The “Mod Record” label can be
found on the back of the ODU as shown in Figure 1-3.
Fi
gure 1-3 Mod record label