User's Guide Part 1

PTP 54600 reference information Chapter 4 Reference information
phn-0896_009v003
4-58
UNDER DEVELOPMENT
Feb 2010
PTP 54600 radio system specifications
Table 4-41 contains radio system specifications for the PTP 54600.
Table 4-41 PTP 54600 RF specifications
Radio Technology Specification
RF Band 5.470-5.725 GHz
Channel Selection
By dynamic frequency control and manual intervention
Automatic detection on start-up and continual adaptation
to avoid interference.
Dynamic Frequency Control
Initial capture 10-15 sec. Out of service on interference
100 ms.
Channel size 5, 10, 15 and 30 MHz
Manual Power Control
Maximum power can be controlled lower than the power
limits shown above in order to control interference to
other users of the band.
Receiver Noise Figure Typically 6 dB
Integrated Antenna
Type/Gain
Integrated flat plate antenna; 23dBi
External Antenna Gain
Depends on feeder losses, see
Regulatory issues with
connectorized units
on page 8-10.
Antenna Beamwidth 8 Degrees
Max Path Loss (5 MHz
channel, integrated antenna)
169 dB
Duplex Scheme Symmetric fixed, asymmetric fixed or adaptive TDD
Range
125 miles (200km) optical Line-of-Sight
6 miles (10km) non-Line-of-Sight