User's Guide Part 1

User Guide: PTP 600 Series PTP 45600 reference information
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
4-27
PTP 45600 radio system specifications
Table 4-20 contains radio system specifications for the PTP 45600.
Table 4-20 PTP 45600 RF specifications
Radio Technology Specification
RF Band 4.400-4.600 GHz
Channel Selection Manual selection.
Dynamic Frequency Control
By intelligent Dynamic Frequency Selection (i-DFS) or
manual intervention; automatic selection on start-up and
continual adaptation to avoid interference.
Channel size 5, 10, 15, 20 and 30 MHz
Manual Power Control
Maximum power can be controlled lower than the power
limits shown above in order to control interference to
other users of the band.
Receiver Noise Figure Typically 5 dB
Antenna Type Integrated flat plate antenna
Antenna Gain 21.5 dBi typical
Antenna Beamwidth 11 Degrees
Max Path Loss (5 MHz
channel)
157 dB
Duplex Scheme Symmetric fixed, asymmetric fixed or adaptive TDD
Range
125 miles (200km) optical Line-of-Sight
6 miles (10km) non-Line-of-Sight
Over-the-Air Encryption Proprietary scrambling mechanism.