Spec Sheet

SPEC SHEET
PMP 430 Access Point (5.4GHz)
The Cambium Point-to-Multipoint (PMP) 430 Access Point and Subscriber Module is the ideal
solution for developing, enhancing and extending advanced broadband networks with more
than 50 Mbps of total aggregate throughput for data transfer, voice and video applications.
Cambium Networks products combine field-proven toughness with exceptional performance,
security, ease-of-use and cost effectiveness.
Because of GPS Synchronization, Access Points can be co-located on the same tower
location with other Cambium PMP. Subscriber Modules can be purchased with throughputs
of 4, 10, 20 or Uncapped Mbps and throughput can be enhanced to existing modules via a
fixed software license.
Cambium Networks provides exceptional wireless broadband connectivity solutions. With
more than 3 million modules deployed in thousands of networks around the world, Cambium
solutions are proven to provide cost effective, reliable data, voice and video connectivity.
SPECIFICATIONS
PRODUCT
MODEL NUMBER
5480AP, 5480APC, 5480APUS
SPECTRUM
CHANNEL SPACING
Configurable on 2.5 MHz increments for 5 MHz
Channel Configurable on 5 MHz increments for 10 and 20 MHz Channels
FREQUENCY RANGE
5470-5725 MHz
CHANNEL WIDTH
5 MHz, 10 MHz or 20 MHz
INTERFACE
PHYSICAL LAYER
OFDM 256FFT
MAC (MEDIA ACCESS CONTROL) LAYER
Cambium Proprietary
ETHERNET INTERFACE
10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant)
PROTOCOLS USED
IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
NETWORK MANAGEMENT
HTTP, Telnet, FTP, SNMPv2c
Prizm 3.3 and One Point Wireless Manager 2.2
PERFORMANCE
CYCLIC PREFIX
1/4, 1/8 or 1/16 fixed
SUBSCRIBERS PER SECTOR
Up to 200
ARQ
Yes
COLLOCATION WITH PMP 58100
Yes, 10MHz guard band required or 5MHz with 3 ft vertical required; synchronization
required
COLLOCATION WITH PMP 54100
Yes, 10MHz guard band separation or 5MHz with 3 ft vertical required;
synchronization required
COLLOCATION WITH PMP 52100
YES
MODULATION LEVELS (ADAPTIVE)
1X=QPSK, 2X=16QAM, 3X=64QAM
LATENCY
5-7 ms