User Manual

8 Web Page Reference
136
8.3.10.7 SMTP (Simple Mail Transport Protocol)
The SMTP client is an alternative method for the 500 Series bridge to alert a system
administrator when there are or have been system errors.
SMTP Email Alert: This attribute controls the activation of the SMTP client.
SMTP Enabled Messages: The SMTP Enabled Messages attribute controls which email
alerts the unit will send.
SMTP IP Address: The IP address of the networked SMTP server.
SMTP Port Number: The SMTP Port Number is the port number used by the networked
SMTP server. By convention the default value for the port number is 25.
SMTP Source Email Address: The email address used by the 500 Series to log into the
SMTP server. This must be a valid email address that will be accepted by your SMTP
Server.
SMTP Destination Email Address: The email address to which the 500 Series bridge will
send the alert messages.
8.3.10.8
SNTP (Simple Network Time Protocol)
The SNTP client allows the 500 Series to obtain accurate date and time updates from a
networked timeserver. The system time is used for SNMP and event logging.
SNTP State: When enabled, the Remote Management web page permits the following
attributes to be set:
SNTP IP Address: The IP address of the networked SNTP server.
SNTP Port Number: The port number of the networked SNTP server. By convention the
default value for the port number is 123.
SNTP Poll Interval: The period at which the SNTP client polls the server for time correction
updates. Default 1 hour. If for any reason an SNTP poll fails, the client will automatically
perform 3 retries before waiting for the user defined poll period.
Time Zone: The time zone is a fixed offset from GMT that is added to the SNTP time to allow
the expression of time in all geographic time zones.
Daylight Saving: Allows a fixed offset of one hour to be added to the SNTP time in order to
reflect the local daylight saving time.