User Manual

Web Page Reference
93
Once Section 8.3.4.3 “Wireless Configuration” is complete pressing the “Disarm Installation
Agent” button completes the installation process
17
and the audible installation tone will be
switched off. If the installer wishes to modify the installation configuration then the ‘Back’ link
can be used to access the installation wizard steps described above.
After disarming the wireless link the user is presented with one of two possible configuration
pages, see Figure 52 and Figure 51. The screen presents hyperlinks to the main configuration
and spectrum management pages.
Figure 51 Optional Post Disarm Configuration 2
Figure 52 Optional Post Disarm Configuration 1
After installation the system administrator may wish to modify the wireless units descriptive con-
figuration (link name and link location). In addition the system administrator may wish to change
the spectrum management configuration of the wireless unit, or look at the analysis of the 5.8 GHz
spectrum to see if the automatic channel selection is appropriate for the system administrator’s
network. It is also recommended that a backup copy of the wireless units configuration is taken.
Hyperlinks are provided on the post disarm page for ease of use.
The installation process is completed when both ends of the link are ‘disarmed’.
17