User Manual

Web Page Reference
84
any other parameters require modification then it is recommended that the system administrator
use the Installation Wizard.
A detailed description of the Installation Wizard follows: The 500 Series bridge operational software
requires a license key to enable the wireless bridging capability and programs region code specific
parameters in to the unit.
Figure 43 License Key Data Entry
A license key is programmed into each unit during production and can be found written on the
Configuration Data Summary Label which is attached to the Quick Install Guide. If subsequently
the license key has been mislaid, replacement keys can be applied for online or via your distributor.
If a valid license key is not detected in the unit’s non-volatile memory then the user is prompted
to enter a valid key. It should be noted that 500 Series bridge units are shipped as link pairs and,
as such, valid license keys are entered during the production process. To enter a license key simply
type or paste the license key into the data entry box (Figure 43) and click the ‘validate license
key’ button.
8.3.4.2 Internet Protocol Configuration
Step 1 of the installation wizard requires the installer to enter the Internet Protocol (IP) configu-
ration.