Manualshelf

User Manual

ManualsBrandsCambium Networks ManualsElectronicsPoint to Point Wireless Bridge
71727374757677787980
Web Page Reference
71
Caution: You must ensure that you can access the VLAN which you configure here, otherwise
you will be unable to access the unit following the next reboot.
Caution: The PTP 500 is only compatible with single VLAN tagged packets. Any packet with
two or more tags will be ignored.
Figure 34 VLAN Configuration Fields
VLAN Management VID: This 802.1Q VLAN VID will be included in packets generated by
the management interfaces. Valid settings are in the range 0 to 4094.
VLAN Management Priority: This 802.1Q VLAN Priority will be included in packets generated
by the management interfaces. Valid settings are in the range 0 to 7.
VLAN Management VID Validation: If enabled, the management interfaces will only respond
to Ethernet packets tagged with the configured 802.1Q VLAN Management VID; otherwise packets
with any VID will be accepted.