User Manual

Web Page Reference
122
8.3.15 Reboot
The reboot page allows the system administrator to perform commanded reboots of the wireless
unit. The reboot page also allows the system administrator to view a list of past reboot reasons.
The “Previous Reasons For Reset/Reboot” field has been implemented as a drop down selection
box, where the latest reason for reboot is located at the top of the list.
If the SNTP service from the remote management section above is active, or the system time has
been set, then the command reboot reason will be accompanied by the date and time at which the
reboot occurred.
Figure 78 System Reboot
Figure 79 Reboot Confirmation Pop Up