User's Manual Part 1

Chapter 2: System hardware Outdoor unit (ODU)
Cambium description
Cambium part number
PTP 650s Integrated END with AC+DC Enhanced Supply (RoW) C050065H025
PTP 650s Integrated END with AC Supply (EU) C050065H026
PTP 650s Integrated END with AC+DC Enhanced Supply (EU) C050065H027
Accessories
Spare ODU port blanking plugs are available from Cambium Networks (Table 4).
Table 4
ODU accessory part numbers
Cambium description
Cambium part number
PTP 650 Series Blanking Plug Pack (Qty 10) N000065L036
ODU mounting brackets
The integrated and connectorized mounting brackets (Figure 9) are used to mount the ODU on
poles with diameters in the range 50 to 75 mm (2 to 3 inches). The extended mounting bracket
(Figure 9) is used for mounting an integrated or connectorized ODU on poles with a diameter of
either 90 mm (3.5 inches) or 115 mm (4.5 inches).
Before ordering ODU mounting brackets, be aware of the following:
• Individual integrated ODUs are supplied without a mounting bracket (Table 2).
• Individual connectorized ODUs are supplied with a connectorized mounting bracket (Table 2).
• ODUs in kits are supplied with an integrated or connectorized bracket, as appropriate (Table 3).
If separate ODU mounting brackets are required, order them from Cambium Networks (Table 5).
Page
2-5