User's Manual Part 1

Chapter 3: System planning Data throughput capacity tables
Data throughput capacity tables
Use the following tables to look up the data throughput rates (Mbits/s) that are achieved when two
PTP 650 ODUs are linked and the link distance (range) is 0 km:
PTP 650 variant
Link symmetry
Link optimization
Table
Full 1:1 IP Table 49
TDM Table 50
2:1 IP Table 51
TDM Table 52
Adaptive IP Table 53
Mid 1:1 IP Table 54
TDM Table 55
2:1 IP Table 56
TDM Table 57
Adaptive IP Table 58
Lite 1:1 IP Table 59
TDM Table 60
2:1 IP Table 61
TDM Table 62
Adaptive IP Table 63
Use the following range adjustment graphs to look up the link range and find the throughput factor
that must be applied to adjust the 0 km data throughput rates:
Link symmetry
Link optimization
Bandwidth
45 MHz
40 MHz
20 MHz
10 MHz
1:1 IP Figure 33 Figure 34 Figure 35 Figure 36
TDM Figure 37 Figure 38 Figure 39 Figure 40
2:1 IP Figure 41 Figure 42 Figure 43 Figure 44
TDM Figure 45 Figure 46 Figure 47 Figure 48
Adaptive IP Figure 49 Figure 50 Figure 51 Figure 52
Throughput for link symmetry 2:1 is the same as 1:2, but the Tx and Rx data rates are swapped.
Page
3-49