Installation Guide
Table Of Contents
- PMP 450i and PTP 450i Configuration and User Guide
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This Configuration and User Guide
- Chapter 1: Reference information
- Chapter 2: Configuration
- Preparing for configuration
- Task 1: Connecting to the unit
- Task 2: Configuring IP and Ethernet interfaces
- Configuring the AP IP interface
- NAT, DHCP Server, DHCP Client and DMZ in SM
- Configuring the SM IP interface with NAT disabled
- Configuring the SM IP interface with NAT enabled
- NAT tab of the SM with NAT disabled
- NAT tab of the SM with NAT enabled
- Reconnecting to the management PC
- VLAN Remarking and Priority bits configuration
- VLAN tab of the AP
- VLAN tab of the SM
- VLAN Membership tab of the SM
- PPPoE tab of the SM
- NAT Port Mapping tab of the SM
- Task 3: Upgrading the software version and using CNUT
- Task 4: Configuring General and Unit settings
- Task 5: Configuring security
- Isolating APs from the internet
- Encrypting radio transmissions
- Managing module access by passwords
- Requiring SM Authentication
- Filtering protocols and ports
- Encrypting downlink broadcasts
- Isolating SMs
- Filtering management through Ethernet
- Allowing management only from specified IP addresses
- Configuring management IP by DHCP
- Restricting radio Telnet access over the RF interface
- Security tab of the AP
- Filtering protocols and ports
- Protocol Filtering tab of the AP
- Port configuration tab of the AP
- Security tab of the SM
- Protocol Filtering tab of the SM
- Port Configuration tab of the SM
- Task 6: Configuring radio parameters
- Task 7: Setting up SNMP agent
- Task 8: Configuring syslog
- Task 9: Configuring remote access
- Task 10: Monitoring the AP-SM Link
- Task 11: Configuring quality of service
- Maximum Information Rate (MIR) Parameters
- Token Bucket Algorithm
- MIR Data Entry Checking
- Committed Information Rate (CIR)
- Bandwidth from the SM Perspective
- Interaction of Burst Allocation and Sustained Data Rate Settings
- High-priority Bandwidth
- Traffic Scheduling
- Setting the Configuration Source
- Quality of Service (QoS) tab of the AP
- DiffServ tab of the AP
- Quality of Service (QoS) tab of the SM
- DiffServ tab of the SM
- Task 12: Performing an Sector Wide SA
- Task 13: Zero Touch Configuration Using DHCP Option 66
- Task 14: Configuring Radio via config file
- Task 15: Configuring a RADIUS server
- Understanding RADIUS for PMP 450i
- Choosing Authentication Mode and Configuring for Authentication Servers - AP
- SM Authentication Mode – Require RADIUS or Follow AP
- Handling Certificates
- Configuring your RADIUS servers for SM authentication
- Assigning SM management IP addressing via RADIUS
- Configuring your RADIUS server for SM configuration
- Using RADIUS for centralized AP and SM user name and password management
- RADIUS Device Data Accounting
- RADIUS Device Re-authentication
PMP 450i and PTP 450i Configuration and User
Task 15: Configuring a RADIUS server
Cambium-Canopy-ULBR
26.161.6
intege
N
0-100000
kbps
C
onfiguration > Quality of Service > Sustained Uplink
D
ata
Rate
dependent
on
radio
f
eature
set
32
bits
Cambium-Canopy-ULBL
26.161.7
intege
N
0-2500000
kbps
C
onfiguration > Quality of Service > Uplink Burst
Allocation
dependent
on
radio
feature
set
32
bits
Cambium-Canopy-DLBR
26.161.8
intege
N
0-100000
kbps
C
onfiguration > Quality of Service > Sustained
D
ownlink
Data
Rate
dependent
on
radio
f
eature
set
32
bits
Cambium-Canopy-DLBL
26.161.9
intege
N
0-2500000
kbps
C
onfiguration > Quality of Service > Downlink Burst
A
llocation
dependent
on
radio
f
eature
set
32
bits
Cambium-Canopy-
26.161.14
intege
N
0-disable,
1-enable
Configuration > VLAN > Dynamic
Learning
1
32
bits
Cambium-Canopy-
26.161.15
intege
N
0-all, 1-tagged,
2-untagged
Configuration > VLAN > Allow Frame
Types
0
32
bits
Cambium-Canopy-VLIDSET
26.161.16
intege
N
VLAN Membership
(1-4094)
Configuration > VLAN
Membership
0
32
bits
Cambium-Canopy-VLAGETO
26.161.20
intege
N
5 - 1440
minutes
Configuration > VLAN > VLAN Aging
Timeout
25
mins
32
bits
Cambium-Canopy-VLIGVID
26.161.21
intege
N
1 –
4094
Configuration > VLAN > Default Port
VID
1
32
bits
Cambium-Canopy-VLMGVID
26.161.22
intege
N
1 –
4094
Configuration > VLAN > Management
VID
1
32
bits
Cambium-Canopy-
26.161.23
intege
N
0-disable,
1-enable
Configuration > VLAN > SM Management VID
Pass-
1
32
bits
Cambium-Canopy-BCASTMIR
26.161.24
intege
N
0-100000 kbps,
0=disabled
C
onfiguration > Quality of Service >
B
roadcast/Multicast
Uplink
Data
dependent
on
radio
f
eature
set
32
bits
Cambium
-Canopy-Gateway
26.161.25
ipaddr
N
-
Configuration > IP > Gateway IP Address
0.0.0.0
-
Cambium
-Canopy-ULMB
26.161.26
intege
r
N
0
-100000 kbps
Configuration > Quality of Service > Max Burst
Uplink Data Rate
0
32 bits
202
pmp-0957 (April 2015)