Installation Guide

PMP 450i and PTP 450i Configuration and User
Task 13: Zero Touch Configuration Using DHCP
Option 66
"location": {
"siteName": "Test site"
},
"smRadioConfig": {
"frequencyScanList": [
5475000,
5480000
],
"colorCodeList": [
{
"colorCode": 42,
"priority": 1
}
]
},
"networkConfig": {
"lanDhcpState": 1
}
},
"cfgFileVersion": "1.0",
"cfgFileString": "Canopy configuration file",
"configFileParameters": {
"rebootIfRequired": true
}
}
When configuration is imported, only the items that exist in the configuration file
are modified. Parameters that are not in the imported file are not changed. If user
wish to revert those settings to their factory default values, please add a
“setToDefaults” item under “configFileParameters” section with a value of true.
"cfgFileVersion": "1.0",
"cfgFileString": "Canopy configuration file",
"configFileParameters": {
"rebootIfRequired": true,
"setToDefaults": true
}
In case, the SM needs to fetch the configuration file on each boot up even when not
connecting to AP via ICC, set “Network Accessibility” to “Public” and “DHCP State”
to “Enabled” in the “Configuration > IP” page before exporting the configuration.
178 pmp-0957 (April 2015)