Installation Guide
Table Of Contents
- PMP 450i and PTP 450i Configuration and User Guide
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This Configuration and User Guide
- Chapter 1: Reference information
- Chapter 2: Configuration
- Preparing for configuration
- Task 1: Connecting to the unit
- Task 2: Configuring IP and Ethernet interfaces
- Configuring the AP IP interface
- NAT, DHCP Server, DHCP Client and DMZ in SM
- Configuring the SM IP interface with NAT disabled
- Configuring the SM IP interface with NAT enabled
- NAT tab of the SM with NAT disabled
- NAT tab of the SM with NAT enabled
- Reconnecting to the management PC
- VLAN Remarking and Priority bits configuration
- VLAN tab of the AP
- VLAN tab of the SM
- VLAN Membership tab of the SM
- PPPoE tab of the SM
- NAT Port Mapping tab of the SM
- Task 3: Upgrading the software version and using CNUT
- Task 4: Configuring General and Unit settings
- Task 5: Configuring security
- Isolating APs from the internet
- Encrypting radio transmissions
- Managing module access by passwords
- Requiring SM Authentication
- Filtering protocols and ports
- Encrypting downlink broadcasts
- Isolating SMs
- Filtering management through Ethernet
- Allowing management only from specified IP addresses
- Configuring management IP by DHCP
- Restricting radio Telnet access over the RF interface
- Security tab of the AP
- Filtering protocols and ports
- Protocol Filtering tab of the AP
- Port configuration tab of the AP
- Security tab of the SM
- Protocol Filtering tab of the SM
- Port Configuration tab of the SM
- Task 6: Configuring radio parameters
- Task 7: Setting up SNMP agent
- Task 8: Configuring syslog
- Task 9: Configuring remote access
- Task 10: Monitoring the AP-SM Link
- Task 11: Configuring quality of service
- Maximum Information Rate (MIR) Parameters
- Token Bucket Algorithm
- MIR Data Entry Checking
- Committed Information Rate (CIR)
- Bandwidth from the SM Perspective
- Interaction of Burst Allocation and Sustained Data Rate Settings
- High-priority Bandwidth
- Traffic Scheduling
- Setting the Configuration Source
- Quality of Service (QoS) tab of the AP
- DiffServ tab of the AP
- Quality of Service (QoS) tab of the SM
- DiffServ tab of the SM
- Task 12: Performing an Sector Wide SA
- Task 13: Zero Touch Configuration Using DHCP Option 66
- Task 14: Configuring Radio via config file
- Task 15: Configuring a RADIUS server
- Understanding RADIUS for PMP 450i
- Choosing Authentication Mode and Configuring for Authentication Servers - AP
- SM Authentication Mode – Require RADIUS or Follow AP
- Handling Certificates
- Configuring your RADIUS servers for SM authentication
- Assigning SM management IP addressing via RADIUS
- Configuring your RADIUS server for SM configuration
- Using RADIUS for centralized AP and SM user name and password management
- RADIUS Device Data Accounting
- RADIUS Device Re-authentication
PMP 450i and PTP 450i Configuration and User G
List of Tables
List of Tables
Table 1 PMP 450i wireless specifications ........................................................................ 2
Table 2 PMP 450i safety compliance specifications ........................................................ 3
Table 3 EMC emissions compliance ................................................................................. 3
Table 4 Minimum Safe Separation Distance .................................................................... 6
Table 5 Radio certifications .............................................................................................. 7
Table 6 OFDM DFS operation based on Country Code setting ....................................... 9
Table 7 US FCC IDs Numbers and Covered Configurations ......................................... 10
Table 8 IP interface attributes ......................................................................................... 21
Table 9 SM with NAT disabled - IP attributes ................................................................. 27
Table 10 SM with NAT enabled - IP attributes ............................................................... 29
Table 11 SM with NAT disabled - NAT attributes ........................................................... 31
Table 12 SM with NAT enabled - NAT attributes ............................................................ 35
Table 13 SM DNS Options with NAT Enabled ................................................................ 40
Table 14 VLAN Remarking Example ............................................................................... 41
Table 15 AP VLAN tab attributes .................................................................................... 43
Table 16 Q-in-Q Ethernet frame ...................................................................................... 44
Table 17 SM VLAN attributes .......................................................................................... 47
Table 18 SM VLAN Membership attributes ................................................................... 51
Table 19 SM PPPoE attributes ........................................................................................ 52
Table 20 SM NAT Port Mapping attributes ..................................................................... 55
Table 21 AP General tab attributes ................................................................................. 62
Table 22 AP Unit Settings attributes ............................................................................... 69
Table 23 SM General Configuration attributes ............................................................... 72
Table 24 SM Unit Settings attributes .............................................................................. 75
Table 25 AP Time attributes ............................................................................................ 77
Table 26 Ports filtered per protocol selection ................................................................. 87
Table 27 AP Security attributes ....................................................................................... 94
Table 28 AP Protocol Filtering attributes ........................................................................ 98
Table 29 AP Port Configuration attributes ...................................................................... 99
Table 30 SM Security attributes ................................................................................... 101
Table 31 SM Protocol Filtering attributes ..................................................................... 107
Table 32 SM Port Configuration attributes .................................................................. 108
Table 33 AP Radio attributes ......................................................................................... 110
Table 34 Example for mix of multicast and unicast traffic scenarios ........................... 116
Table 35 DiffServ attributes .......................................................................................... 120
Table 36 DiffServ SNMP objects ................................................................................... 121
Table 37 Packet Filter Configuration attributes (IPv6 only) ......................................... 122
Table 38 SM Radio attributes ........................................................................................ 125
pmp-0957 (April 2015)
xiii