Installation Guide
Table Of Contents
- PMP 450i and PTP 450i Configuration and User Guide
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This Configuration and User Guide
- Chapter 1: Reference information
- Chapter 2: Configuration
- Preparing for configuration
- Task 1: Connecting to the unit
- Task 2: Configuring IP and Ethernet interfaces
- Configuring the AP IP interface
- NAT, DHCP Server, DHCP Client and DMZ in SM
- Configuring the SM IP interface with NAT disabled
- Configuring the SM IP interface with NAT enabled
- NAT tab of the SM with NAT disabled
- NAT tab of the SM with NAT enabled
- Reconnecting to the management PC
- VLAN Remarking and Priority bits configuration
- VLAN tab of the AP
- VLAN tab of the SM
- VLAN Membership tab of the SM
- PPPoE tab of the SM
- NAT Port Mapping tab of the SM
- Task 3: Upgrading the software version and using CNUT
- Task 4: Configuring General and Unit settings
- Task 5: Configuring security
- Isolating APs from the internet
- Encrypting radio transmissions
- Managing module access by passwords
- Requiring SM Authentication
- Filtering protocols and ports
- Encrypting downlink broadcasts
- Isolating SMs
- Filtering management through Ethernet
- Allowing management only from specified IP addresses
- Configuring management IP by DHCP
- Restricting radio Telnet access over the RF interface
- Security tab of the AP
- Filtering protocols and ports
- Protocol Filtering tab of the AP
- Port configuration tab of the AP
- Security tab of the SM
- Protocol Filtering tab of the SM
- Port Configuration tab of the SM
- Task 6: Configuring radio parameters
- Task 7: Setting up SNMP agent
- Task 8: Configuring syslog
- Task 9: Configuring remote access
- Task 10: Monitoring the AP-SM Link
- Task 11: Configuring quality of service
- Maximum Information Rate (MIR) Parameters
- Token Bucket Algorithm
- MIR Data Entry Checking
- Committed Information Rate (CIR)
- Bandwidth from the SM Perspective
- Interaction of Burst Allocation and Sustained Data Rate Settings
- High-priority Bandwidth
- Traffic Scheduling
- Setting the Configuration Source
- Quality of Service (QoS) tab of the AP
- DiffServ tab of the AP
- Quality of Service (QoS) tab of the SM
- DiffServ tab of the SM
- Task 12: Performing an Sector Wide SA
- Task 13: Zero Touch Configuration Using DHCP Option 66
- Task 14: Configuring Radio via config file
- Task 15: Configuring a RADIUS server
- Understanding RADIUS for PMP 450i
- Choosing Authentication Mode and Configuring for Authentication Servers - AP
- SM Authentication Mode – Require RADIUS or Follow AP
- Handling Certificates
- Configuring your RADIUS servers for SM authentication
- Assigning SM management IP addressing via RADIUS
- Configuring your RADIUS server for SM configuration
- Using RADIUS for centralized AP and SM user name and password management
- RADIUS Device Data Accounting
- RADIUS Device Re-authentication
PMP 450i and PTP 450i Configuration and User Guide Contents
Exporting Session Status page of the AP .................................................................. 152
Task 11: Configuring quality of service .......................................................................... 154
Maximum Information Rate (MIR) Parameters ........................................................ 154
Token Bucket Algorithm ............................................................................................ 154
MIR Data Entry Checking ......................................................................................... 155
Committed Information Rate (CIR) ........................................................................... 155
Bandwidth from the SM Perspective ........................................................................ 156
Interaction of Burst Allocation and Sustained Data Rate Settings .......................... 156
High-priority Bandwidth ............................................................................................ 156
Traffic Scheduling ..................................................................................................... 158
Setting the Configuration Source ............................................................................. 159
Quality of Service (QoS) tab of the AP ...................................................................... 161
DiffServ tab of the AP ................................................................................................ 163
Quality of Service (QoS) tab of the SM ..................................................................... 165
DiffServ tab of the SM ............................................................................................... 168
Task 12: Performing an Sector Wide SA ......................................................................... 170
Using Spectrum Analyzer tool ................................................................................... 171
Using the Remote Spectrum Analyzer tool ............................................................... 174
Task 13: Zero Touch Configuration Using DHCP Option 66 .......................................... 176
Configuration Steps ................................................................................................... 176
Troubleshooting ......................................................................................................... 181
Task 14: Configuring Radio via config file ...................................................................... 182
Import and Export of config file ................................................................................ 182
Task 15: Configuring a RADIUS server .......................................................................... 184
Understanding RADIUS for PMP 450i ...................................................................... 184
Choosing Authentication Mode and Configuring for Authenti
c
ation
Ser
v
er
s - AP
................................................................................................................................... 185
SM Authentication Mode – Require RADIUS or Follow AP .................................. 190
Handling Certificates ................................................................................................ 197
Configuring your RADIUS servers for SM authentication ....................................... 199
Assigning SM management IP addressing via RADIUS ........................................... 200
Configuring your RADIUS server for SM configuration ........................................... 200
Using RADIUS for centralized AP and SM user name and password management 204
RADIUS Device Data Accounting .............................................................................. 208
RADIUS Device Re-authentication ............................................................................ 212
Appendix A : Glossary ...................................................................................... 213
Appendix B : FCC and IC approved antennas .................................................... 227
x
pmp-0957 (April 2015)