User's Manual

Table Of Contents

7 Installation

107

The ODU must be mounted using the following steps, ensuring that the cable entry is at the

bottom:

1. Attach the bracket strap to the pole using M8 x 70 mm bolts, M8 flat washers and M8

coil washers (Figure 37). Tighten to ensure the assem

bly grips but can be adjusted.

Figure 37 – ODU Bracket Strap

2. Offer the ODU (with pre-fitted mounting bracket) to the bracket strap and affix using

the captive M8 bolt. Tighten to ensure the assembly grips, but can be adjusted on the

pole (Figure 38 and Figure 39).

Figure 38 –

ODU Mounting Bracket