www.calypsoinstruments.com R CALYPSO ULTRASONIC ULP WIND INSTRUMENT AND DATA LOGGER User manual ULTRASONIC Portable English version 1.0 07.07.
If you want to know more about our new ULTRASONIC ULP 485 wind meter, please keep reading or visit our website www.calypsoinstruments.
0. Index 1. Product overview 1. Product overview 2. Package content 3. Technical specifications Thank you for choosing the ULP Ultrasonic Anemometer from Calypso Instruments. This ULP is the first model or our generation II, representing an important technology breakthrough condensing an extensive R+D investment: · Both shape and firmware have been enhanced for an improved rain performance,being this point key for static applications such as weather stations. 3.1.Dimensions 3.2.
3. Technical specifications The Ultrasonic ULP has the following technical specifications: · Diameter: 68 mm (2.68 in.) 3.1. Dimensions RS485/MODBUS RTU Output: White GND (Power -) , Brown VCC (Power +) Yellow DATA (B -) Green DATA (A +) · Height: 65 mm (2.56 in.) UART/TTL Output: White GND (Power -) Yellow DATA Rx Brown VCC (Power +) Green DATA Tx 1Autotransmit 2-POLL telegram 3-MODBUS Data format NMEA0183 Baudrate 2400 to 115200 bauds Voltage range 3.
3. Technical specifications 3.5 Wind Information · Wind speed 3.7. Mounting accessories · Wind direction A wide range of accessories can be used with the device. The ULP can be mounted on a flat service and screwed on to different sizes of poles. It can also be used with an adaptor for poles of 39 mm. Sample rate: 1 Hz Wind Speed Range : Range: 0 to 45 m/s (1.12 to 100 mph) Accuracy: ±0.1 m/s at 10m/s (0.22 at 22.4 mph) Threshold: 1 m/s (2.
4. Configuration Options The Ultrasonic ULP can be set up by using a special App made by Calypso Instruments. In order to use the APP you should download the following configurator from our website at www.calypsoinstruments.com. baudrate: output rate: output units: 3.8. Firmware 2400 to 115200 (8n1) bauds 0.1 to 10 Hertz m/sec., knots or km/h Upgradable via RS485, MODBUS or UART/TTL 3.9 Product Material ULP is engineered to be a robust device with minimal downtime.
5. General information 5.1. General recommendations The Ultrasonic Ultra-Low-Power has been calibrated with accuracy, following the same calibration standards for each unit. Regarding mounting the unit, as we have described before , the mast head has to be prepared for the mechanical installation. Align the North mark of the Ultrasonic Portable Mini, in order to have it pointed towards the bow. Make sure to install the sensor in a location free from wind perturbation, usually on the mast head.
ULTRASONIC Ultra-Low-Power User manual English version 1.
