Quick Reference Guide
Table Of Contents
- 1Unpacking and Checking
- 2Radio Overview
- 3Operations
- 4CPS-Menu
- 5Common Setting
- 6Conventional Setting
- 6.1.1Conventional Setting-Password
- 6.1.2Conventional Setting-Zone
- 6.1.3Conventional Setting-Channel-Digital Channel
- 6.1.4Conventional Setting-Channel-Analog Channel
- 6.1.5Conventional Setting-Multi CTC/CDC
- 6.1.6Conventional Setting-Contact
- 6.1.7Conventional Setting-Network-Network
- 6.1.8Conventional Setting-Network- Local Access Managem
- 6.1.9Conventional Setting-Network-Multisite Access Mana
- 6.1.10Conventional Setting-Network-Application Programmi
secr et▲
All rights reserved.No spreading abroad without permission of Caltta.
30
This option allows users to specify a time slot through which the repeater
transmit/receive the data to/f rom other repeaters in the IP Multi-site Connect network.
Rx
Receive Frequency[MH z]
This option allows users to s et a frequency for the current channel to receive signals.
Range:136-174MHz.
Tx
Transmit Frequency[MHz]
This option allo ws users to set a frequency for the current channel to transmit signals.
Range:136-174MHz.
Tx Contac t Name
This option allo ws users to select a regular c
ontact for the current channel.
Power Level
This option allo ws users to set the TX power leve l for the current channel.
Tx Time-out Time[s]
This option allows users to set a transmission time-out time for the current channel.
Range:15~600s or Infinite.
6.1.4 Conventional Setting-Channel-Analog Channe l
Channel Alias
Users can set a unique name for each channel.Such as A456.150 .
Channel Spacing[KHz]
This options allows users to s et the channel spacing for the curre
nt channel.
EmpDe-emp
This option s ets the pre-emphasis and de-emphas is function s to improve the
articulation of audio. The pre-emphasis function filters transmitted signals, and the
de-emphasis functi on filters rece iv ed signals.
Multi CTC/CDC
This option allows users to apply the CTCSS/CDCSS table as the condition during
decoding.
CTCSS Tail Revert Option