Quick Reference Guide
Table Of Contents
- 1Unpacking and Checking
- 2Radio Overview
- 3Operations
- 4CPS-Menu
- 5Common Setting
- 6Conventional Setting
- 6.1.1Conventional Setting-Password
- 6.1.2Conventional Setting-Zone
- 6.1.3Conventional Setting-Channel-Digital Channel
- 6.1.4Conventional Setting-Channel-Analog Channel
- 6.1.5Conventional Setting-Multi CTC/CDC
- 6.1.6Conventional Setting-Contact
- 6.1.7Conventional Setting-Network-Network
- 6.1.8Conventional Setting-Network- Local Access Managem
- 6.1.9Conventional Setting-Network-Multisite Access Mana
- 6.1.10Conventional Setting-Network-Application Programmi
secret▲
All rights reserved.No spreading abroad without permission of Caltta.
22
Beacon
Beacon Tx Mode
This option decides the interval for beacon signal transmission in IP Multi-site
Connect mode.
Range: Local/Network
Default: Local
Beacon Duration
This option allows the user to configure how long the beacon signal lasts. In IP
Multi-site Connect mode, the beacon signal will be transmitted when the beacon interval
expires.
Range: Disable/480-18000ms
Default: Disable
Step: 120ms
Beacon Interval
This option allows the user to configure the interval for transmitting beacon signal in
IP Multi-site Connect mode.
Range: 10-600s
Default: 60s
Step: 10s
5.1.3 Common Setting-General Setting-Analog Setting
Analog Set
Squelch Open Level
This function sets the squelch level of output Repeater. It can adjust the squelch
enabling threshold of received signals. The value range of this parameter is variable, and
it is associated with the Squelch Normal Level parameter value. The relationship is as
follows: Squelch Open Level < Squelch Normal Level < Squelch Tight Level.
Default: 0.
Squelch Normal Level
This function sets the squelch level of output Repeater. It can adjust the squelch
enabling threshold of received signals. The value range of this parameter is variable, and