Quick Start Guide

3
Call
To ensure that the called party can hear you clearly , keep the microphone 2.5 cm
to 5 cm away from your mouth when speak.
Private Call
Initiate a private call
If your local distributor sets a programmable key for a one touch call,you can initi-
ate a private call via the programmable key.
Answer a private call
After receiving a private call, it is not required to press Call/Answer key, your radio
shall establish the call automatically. After the call is successful, your radio plays a
reminding tone.
Group Call
Initiate a group call
You can initiate a group call through one of the following ways:
•
Initiate a group call to a preset group contact
In standby, press the PTT key to initiate a group call to the group contact preset for
the channel selection rotary knob.
•
Initiate a group call via the programmable key
If your local distributor sets a programmable key for a one touch call, you can
initiate a group call via the programmable key
Answer a call
After receiving a group call, it is not required to press Call/Answer key, your radio
shall establish the call automatically. After the call is successful, your radio plays a
reminding tone.
Late Entry
After the group call is established, it is allowed that the member, which has not
joined the group call, to be connected to the group call again during call communi-
cation.
MAIN TECHNICAL SPECIFICATIONS
Frequency Bands UHF1: 400-470MHz / VHF 136-174 MHz
Max. Power Output
Low power mode:1W
High power mode: 4W(UHF1) / 5W(VHF)
FM Modulation
12.5KHz:11K0F3E
4FSK Digital Modulation(Data Only) 12.5KHz: 7K60F1D
4FSK Digital Modulation(Voice Only) 12.5KHz: 7K60F1E
4FSK Digital Modulation(Voice and Data)
Sensitivity(Analog) 0.22uV(12dB SINAD)
12.5KHz: 7K60F1D&7K60F1E