Quick Start Guide

3
To power on your radio, rotate the Power/Volume rotary knob clockwise until a click is heard.
To power off your radio, rotate the Power/Volume rotary knob counterclockwise until a
click is heard.
2.2
2+*/4*/)':58
3.
('9/)56+8':/549
3.1
Power On/Off Your Radio
After powering on your radio, rotating the Power/Volume rotary knob clockwise can turn
up the volume, and rotating the Power/ Volume rotary knob counterclockwise can turn
down the volume.
3.2
Turn Up/down the Volume
You can add channels in one zone to manage the channels efficiently. Your radio
supports up to 32 zones. Each zone contains up to 32 channels.
You can enter the Zone menu after powering on the radio, press Up/Down key to
choose your zone, and press OK key to switch to your zone.
3.3
Select a Zone
In standby, you can rotate the Channel selection rotary knob and switch the current
working channel. Rotating clockwise can turn down the channel, and rotating
counterclockwise can turn up the channel.
3.4
Select a Channel
If the keypad is unnecessary temporarily, you can lock the keypad to prevent
misoperations. You can lock or unlock the keypad through one of the following ways:
• Key combination
Press the OK+* key combination. The keypad can be locked or unlocked.
• Programmable key
If your distributor sets a Keypad Lock shortcut key, you can press the shortcut key to lock or
unlock the keypad.
• Menu
Enter the main menu, select Setting > Radio Setting >Keypad Lock, and select Disable or a
time option. After you select a time option, if you perform no operation within the specified
period, the keypad is locked automatically. If you select Disable, the keypad will not be
locked automatically. You can press the key combination or the Keypad Lock shortcut key
to lock or unlock the keypad.
NOTE:
If there is no Keypad Lock in the Radio Setting menu, you can ask your distributor to set the
automatic keypad lock function.
3.5
Lock/Unlock the Keypad
Indicator Radio Status
Lit green Your radio is receiving voice signals.
Lit red Your radio is transmitting voice signals.
Flashing orange Your radio is in scanning status.
Lit orange
After a call is established, there is no voice transmitted or
received in the service channel. You can press PTT key
to speak.