Caltron Industries, Inc. Copyright © 2006-2007 15” MPEG LCD Display (MD-15) User Manual Version: 1.
Revision Author Date Description 1.0 Peter Lin Jan 02, 2007 1. Initial draft. 1.1 Peter Lin Jan 27, 2007 1. Add file trees 1.2 Peter Lin Feb 27, 2007 1. Add operating instructions 1.3 Johnny Young March 3, 2007 1. Add user instructions and change format. 1.4 Johnny Young Jan 15, 2007 1. Add 1.3, 1.4, FAQ solution, and enhancing 2. Installation Procedure 1.5 Johnny Young Feb 6, 2007 1. Change file tree structure. 1.6 Johnny Young Feb 21, 2007 1.
Table of Contents 1. Introductions ......................................................................... 1 1.1 Safety Instructions...............................................................................................1 1.2 Features ................................................................................................................4 1.3 Notice ....................................................................................................................5 1.4 Check List ..........
1. Introduction 1.1 Safety Instructions 1.1.1 Read this user manual All safety and operating instructions in this user manual should be read before operating the product 1.1.2 Keep this user manual This user manual should be retained for future references. 1.1.3 Head Warnings Be cautious about warning signals on the product. 1.1.4 Follow Instructions Please follow instructions in this user manual 1.1.5Attachments Do not use attachments not recommended by the product manufacturer. 1.1.
1.2.0 Heat Ventilation There is heat ventilation on the top and the bottom part of the product. do not block any ventilation openings with objects g. carpet). To avoid overheating, For the best ventilation, allow the product to have 10cm radius of the opening. 1.2.1 Grounding or Polarization This product could be equipped with an alternate plug. 1.2.2 Power –Cord Protection Power supply cords should be routed so that they are unlikely to be walked on or pitched by items placed upon them.
1.2.7 Replacement parts When replacement parts are required, be sure that the technician uses replacement parts specified by the manufacturer or parts with same features. Unauthorized substitution may result in fire, electric shock or other hazards. 1.2.8 Safety Check Upon completion of any service or repair to this product, ensure safety checks performed by qualified technician for proper operating condition. 1.2.
1.1 Product Description The digital signage unit refers to the use of digital technology by sending messages and images to a display in public places. With the rise of digital signage, it not only replaces the traditional marketing approaches, but it also enhances the quality of communication. Digital signage can easily guide or provide a person with decision-making information such as to make a certain purchasing decisions. 1.
• Semi-hidden Power on/off and other adjustment (OSD) switches • IR Remote control sound level • 100 x 100 mm VESA standard display signage mounting holes easily match third party mounting kits • Integrated speakers for audio 1.3 Notice 1. Do not touch the LCD panel surface with sharp or hard objects. 2. Do not use abrasive cleaners, waxes or solvents for cleaning, use only a dry or damp, soft clothe. 3. Use only with a high quality, safety-approved, AC/DC power adapter.
1.4 Check List z z Interactive Digital Signage Unit Accessory 1. Power Adapter 2. Power Cord 3. Remote Control If any items are missing or damaged, please contact your dealer immediately. 1.5 Outward Appearance 2. Installation Procedure Take out the power cord and adaptor from the accessories case. z z z z Connect the plug of adaptor into the power jack of the media player. Connect power cord to the power adapter comes with the unit. Connect power cord plug to an AC outlet.
z Installing/Removing Battery of Remote Control Note: The plastic sheet plays a protective role when there is no the battery in the remote control. Please remove the plastic sheet before using the remote control. Remarks: Type of the remote control battery CR2025. Please check the polarity of the battery before installing. Please remove the battery when the remote control is unused for a long time.
3. Building Content File Structure MD-15 plays the media files in two ways – PLAY ALL and PLAY SPECIFIC FOLDER 3.1 PLAY ALL Switch the rotary counter to “9”. MD-15 plays all image files from the CF memory card in alphanumeric order repeatedly. Quick Tips: *Always set the rotary counter switch to “9” in order to PLAY ALL. MD-15 may not recognize the file name and show the FILE LIBRARY screen or play the file in random if different number is switched. To locate the rotary counter, look behind the MD-15.
3.2.1 Create the file structure first from your computer. 1. Create eight new folders and name them from “1” – “8”. 2. Unlimited multiple files can be put in any folder from “1” to “8”. adding number prefix to file names. For example: 02_flowers.mpeg. Suggest Function: 1. Play your desired folder by adjusting the rotary counter to be “1”, “2”, “3”, “4”, “5”, “6”, “7”, or “8” 2. Switch rotary counter to “9” to play all files in all folders 3.
4. Monitor Display Control Keypad is located at the back of the display. Recommend using a stylus to press the buttons. 4.1 Keypad Definition Buttons Function 1 Right / Decrease 2 Signal Switch Left / Increase 3 Main Menu / Enter 4 Auto Adjust 5 Power On / Off 4.2 Keypad Lock Combination Press Button 3 & 4 simultaneously to lock the keypad. The screen will show “Lock” in the middle. To unlock it, press Button 3 & 4 and the screen will show “unlock”.
5. On Screen Display 5.1 Main Menu 5.2 OSD Operation Procedure 1. 2. 3. 4. 5. 6. 7. 8. Press “Menu/SW3” button to call out the Main Menu Press ▲▼/SW1,2 to select Main Menu Press “Menu/SW3”to access Sub Menu Press ▲▼/SW1,2 to select Sub Menu Press “Menu/SW3” to access the user setting Press ▲▼/SW1,2 to adjust the setting Press “Menu/SW3” to confirm the setting Select Return to return to previous menu or Exit to exit the OSD main menu 4.
S VIDEO -- Select S-Video signal input (multi-signal input model only) RECALL -- Recall factory default input signal setting RETURN -H POSITION Adjust screen Horizontal position V POSITION Adjust screen vertical position CLOCK Correct flickering text or lines (horizontal) PHASE Correct flickering text or lines (vertical) AUTO ADJUST Automatically adjust image clock, phase, H-position, V-position settings RECALL Recall factory default display setting RETURN Return to main menu 9300K Colo
TRANSPARENCY Adjust the transparency of OSD LANGUAGE RECALL Recall factory default OSD setting RETURN Return to main menu English -- Adjust the OSD language to English Frangais -- Adjust the OSD language to French Deutsch -- Adjust the OSD language to German Italiano -- Adjust the OSD language to Italian Espanol -- Adjust the OSD language to Spanish Japanese -- Adjust the OSD language to Japanese 中文繁體 -- Adjust the OSD language to Chinese Big 5 中文簡體 -- Adjust the OSD language to S
(OPTIONAL) -- Recall Recall factory default audio setting Return Return to main menu Exit Exit OSD 14
4. Frequent Ask Questions (FAQs) Picture too dark: ● Check the brightness. ● Check the contrast. ● Check whether LCD is damaged. Failure of remote control: ● Check the power. ● Check whether the battery is tightly installed. ● Check whether the battery is properly installed. ● Check whether there is barrier between the remote control and detector. ● For the failure caused by radio wave interference, including being bright and static noise, turn off the power and restart the player in 10s.
