Manual

TYPE R
CONTENTS
Start Up Guide 5
Getting Started 6
Checklist 6
1. Power up the Core and connect a PC 7
2. Access the basic Core configuration 8
Calrec Configure Login Instructions 8
3. Install a Software Upgrade Licence key (Optional) 10
4. Configure the Core for Surface Panels 11
5. Configure Network Switches & Devices 12
6. Configure Surface panels ID, IP addresses & Subnet masks 14
7. Connect Surface Switch & Surface Panels to the Core 15
8. Access Assist setup and create a new show 16
Calrec Assist Login Instructions 16
9. Connect to Assist from the Studio or Management subnets 18
10. Upload control layouts to the soft panels 20
11. Create layouts with Type R Soft Panel Designer 20
12 Update System Software & AoIP Devices Firmware 21
13. Configure AoIP Port & Connect server IP addresses 21
14. Connect Audio Switch and AoIP Ports to the Core 23
Calrec Connect Login Instructions 25
Surface Panels - Suggested Settings 27
AoIP Network Interfaces - Suggested Settings 29
About Type R manuals 30
User Notes 31