Manual
Table Of Contents
- Start Up Guide
- Getting Started
- Checklist
- 1. Power up the Core and connect a PC
- 2. Access the basic Core configuration
- 3. Install a Software Upgrade Licence key (Optional)
- 4. Configure the Core for Surface Panels
- 5. Configure Network Switches & Devices
- 6. Configure Surface panels ID, IP addresses & Subnet masks
- 7. Connect Surface Switch & Surface Panels to the Core
- 8. Access Assist setup and create a new show
- 9. Connect to Assist from the Studio or Management subnets
- 10. Upload control layouts to the soft panels
- 11. Create layouts with Type R Soft Panel Designer
- 12 Update System Software & AoIP Devices Firmware
- 13. Configure AoIP Port & Connect server IP addresses
- 14. Connect Audio Switch and AoIP Ports to the Core
- Surface Panels - Suggested Settings
- AoIP Network Interfaces - Suggested Settings
- About Type R manuals
- User Notes
28 TYPE R Radio Production System Start Up Guide
Soft
Panel
Type
(LSP/SSP)
Panel Label
( e.g. Guest 1 ) Serial Number
Panel ID
[switch setting] IP Address
Subnet
mask**
9th 19 [00010011] 172.17.101.19 /16
10th 20 [00010100] 172.17.101.20 /16
11th 21 [00010101] 172.17.101.21 /16
12th 22 [00010110] 172.17.101.22 /16
13th
23 [00010111] 172 .17.101.23 /16
14th
24 [00011000] 172.17.101.24 /16
15th
25 [00011001] 172.17.101.25 /16
16th
26 [00011010] 172.17.101.26 /16
17th
27 [00011011] 172 .17.101.27 /16
18th 28 [00011100] 172.17.101.28 /16
19th 29 [00011101] 172 .17.101.29 /16
20th 30 [00011110] 172.17.101.30 /16
21st 31 [00011111] 172.17.101.31 /16
22nd 32 [00100000] 172 .17.101.32 /16
23rd 33 [00100001] 172.17.101.33 /16
24th
34 [00100010] 172 .17.101.34 /16
25th
35 [00100011] 172.17.101.35 /16
26th
36 [00100100] 172.17.101.36 /16
Soft Panel suggested settings table continued:-
**Subnet masks are displayed in CIDR notation