Manual

27
SURFACE PANELS - SUGGESTED SETTINGS
Fader
Panel Fader Range ( e.g. 1-6 ) Serial Number
Panel ID
[switch setting] IP Address
Subnet
mask**
1st
1 [00000001] 172.17.101.1 /16
2nd 2 [00000010] 172.17.101.2 /16
3rd 3 [00000011] 172.17.101.3 /16
4th
4 [00000100] 172 .17.101.4 /16
5th
5 [00000101] 172.17.101.5 /16
6th
6 [00000110] 172.17.101.6 /16
7th
7 [00000111] 172.17.101.7 /16
8th
8 [00001000] 172 .17.101.8 /16
The suggested settings for each surface panel connected to the first mixer in a Type R system are shown below. Use the
tables below to configure your surface panels and to record the serial number, fader range and label details of each panel
for later reference. After configuring the surface panels, you may want to attach labels to them. A blank label sheet is
provided with the Type R core for this purpose. A printer template for this Label sheet is available to distributors on the
Calrec Website.
Soft
Panel
Type
(LSP/SSP)
Panel Label
( e.g. Guest 1 ) Serial Number
Panel ID
[switch setting] IP Address
Subnet
mask**
1st 11 [00001011] 172.17.101.11 /16
2nd 12 [00001100] 172.17.101.12 /16
3rd 13 [00001101] 172.17.101.13 /16
4th 14 [00001110] 172.17.101.14 /16
5th 15 [00001111] 172.17.101.15 /16
6th 16 [00010000] 172.17.101.16 /16
7th 17 [00010001] 172.17.101.17 /16
8th 18 [00010010] 172.17.101.18 /16
**Subnet masks are displayed in CIDR notation