Datasheet

CALRAD
86
- +&-&%-)+)2*#)
The 40-881 is a Digital DVI-D to analog VGA converter and scaler. DVI-D input to
HDDB15 VGA output. Input resolution is automatically detected while the output
resolution and refresh rate can be selected via the OSD menu. The 40-881 has non-
volatile memory and memorizes all your settings before the power is turned off and
recalls those settings the next time the power is turned on. Supports 480P, 720P and
1080I input resolutions and will output 640X480, 800X600, 1024X768, and 1280X1024
PC resolutions. DVI-D cable and 5Vdc power supply included. Size: Length 5.25” x
Width 3” x Height 1.25”.
-+-'++)%%)+&)
The 40-884 is an easy-to-use handheld video pattern generator that generates a wide
variety of test patterns for comprehensive testing, calibration, and repair of HDTV or PC
monitors, and other display based video equipment. Delivers the quality and
functionality you would expect from an expensive high end HDTV pattern generator with
an easy to understand three button control interfaces and visible OSD. Size: Length
5.25” x Width 3” x Height 1.25”.
*7C;7D-AG7CE7CD
*B75;8;53E;A@D
Input port: 1 X HDDB15 Female
Output port: 1 X HDDB 15 Female
Loop port: 1 X HDDB15 Female
Power Supply 5 Volt DC-110/220
Dimension: Length 5.75” X Width 4” X Height 1”
+.&.0'2+-+-2'&%-)+)
This Bi-directional 2 way scaler converts PC VGA to HD component video
or HD component video to PC VGA. Supports HD resolutions of 480P,
720P, 1080i and 1080P and PC resolutions of VGA, SVGA, XGA, SXGA,
UXGA, WXGA, WSXGA and WUXGA. The comprehensive OSD menu
allows users to adjust output resolutions, contrast, brightness, hue,
saturation and sharpness. Loop out for local monitor. 5 Volt DC power
supply and VGA, VGA to Component cables are included.
-+-&$'&%%+- &+&*- &&$'&* +
- &;&$'&%%+- &&%-)+)*#)
The 40-888 allows you to convert VGA or 480i component video to composite video or
S-Video. Supports NTSC 3.58, NTSC 4.43, Pal-M, Pal-N or Secam formats. Switchable
component video or VGA inputs. Manual push button or IR remote controlled. RS232 for
PC control. Easy to use OSD menu allows you to change output resolution, brightness
and contrast. Supports input resolutions of 640X480, 800X600, 1024X768 and
1280X1024. Output resolution 480i or 480P. Includes 3 ft. VGA cable, 3 Ft., component
video cable, 3 ft. composite video cable, 3 ft. s-video cable, IR remote control, 5Vdc
power supply. Size: Length 8” x Width 6” x Height 2”.
Front View
Rear View
IR Remote
)* )A@ECA>34>7
--;67A34>7
Component
Video
Cable
A?BAD;E7-;67A
34>7
*-;67A34>7