Datasheet
CALRAD
70
*+)&.0, &
%',+*#+&)
Enables 2 audio inputs to be switched to
1 output. Slim metal chassis with black
finish. Mounts with velcro, included or
double stick tape. 2 L+R inputs, Female
RCA jacks. Output cable with L+R Male
RCA plugs, 5’ long.
Size: 3”W x 1”H x 2.9”D
+)'&* + &%)
- &*+)&, &*. +)
3 position rotary switch selects between 3
audio/video input signals and sends them
to 1 output device. Black steel cabinet
with white labeling.
-'&* + &%), &
*+)&*. +)
5 inputs to 1 output device. When more
audio inputs are needed for a
receiver/amplifier, provides switching for
CD players, tape decks, tuners, VCR’s,
etc. Black steel cabinet with white
labeling.
Size: 7”W x 2.5”H x 4”D
Size: 7”W x 2.5”H x 4”D
&,)'&* + &%*+)&
*'")*. +
Designed to switch 4 pairs of stereo
speakers from 1 amplifier. Heavy duty
rocker switches. Push-style terminals
accept up to 14 gauge cable. Black steel
cabinet with white labeling. Rated at 120
watts.
Size: 7”W x 2.5”H x 4”D
*7C;7D
F6;A-;67A*B73=7C*7>75EACDF6;AA@G7CE7CD
-* /%%#,+&&)$)**+)&*'")
*#+&). +-&#,$&%+)&#*
Rating per channel 100W, RMS continuous selectable A/B amplifier input. Multiple-
position volume control: 10 position switch - max attenuation 42dB heavy duty. Push
type connectors accept up to 12 awg. cable. Independent channel grounds for safe
connection to all amplifiers (including bridged or floating ground). Load impedance
resistors for amplifier protection. Size: 17”(W) x 3”(H) x 8”(D) front to back including
knobs and terminal. Weight 12.5 lbs.
Size: 17”W x 3.0”H x 8”D
+ +#+&%#&&%-)+)#'$
# %)',#*&$&,#+ &%
The 40-DCT-1 converts a digital audio signal source from a digital
coax RCA jack or optical toslink jack and converts it to an analog
stereo audio signal L+R RCA output jacks. It also includes a digital
coaxial (SPDIF) "loopout" RCA jack, which is ideal if you need to send
a single digital audio signal to both a digital and an analog device at
the same time. Inputs: Coaxial and Optical digital audio ports. Outputs:
Right and Left RCA-type Stereo analog output jacks. Digital audio
format: Two Channel Linear Pulse Code Modulation (LPCM)
Frequency response : 44.1 – 192KHz Sample rate. 24-bit incoming
bitstream on left and right channels. DC Power Supply:12V DC
Included. Size: Length 3.1" x Width 2.5" x Height 1".
Digital Signal
Indicator
DC Power
Indicator
Toslink
Output
DC Power
L+R Audio
Audio
Outputs
Digital
Audio
In\Out
;DB>3J
+
*E7C7A)757;G7C
Digital Audio In
SPDIF or
Toslink
Stereo Analog
Audio Out
-;D;E3>C36A@E:7.743EHHH53>C365A?