Datasheet
CALRAD
33
*7C;7D7D;9@7C*EJ>7.3>>'>3E7D
2-. ) *+) ,+ &%
* %#%.##
'#+
Angled exit wall plate allows
for inwall cables to be routed
downwards
Hole Dimensions: 1.44” X.35”
- ....................Ivory
. ................White
&#&)O* %)
*+0# %*)+&-)*
Designed to be used with the
Calrad 25-360, 25-361and
25-362 attenuators. Easy to
remove designer style insert
comes with matching colored
knob.
#............Almond
"...............Black
..............White
-.................Ivory
. +&) -&)0
"%&*%'#+*
For use with 25-351, 25-
351A, 25-339, 25-339A, 25-
357, and 25-357A. Plates
have numbers 0-10. Knob is
1
5/16” in diameter and
accepts
1/4” shafts.
.....................Ivory
Designer Style Knob
..................White
Designer Style Knob
.................. White
Wall Plate
* %#%#
*+) ,+ &%.##'#+
Plastic single gang hood provides a versatile
method of passing multiple cables from behind
the wall to equipment. Hoods may be installed
in our 70-558 or 70-568 low voltage brackets
and are compatible with our 28 series designer
style single and multi gang wall plates. These
hoods may be installed with the scoop facing in
or out of the wall, to suit a variety of needs.
;?7@D;A@D
W 4.13” X L 1.5” X D 1.5”
Cable Opening: W 1.2” X L 2.3”
Color: White
#-)'
* %#%#
*+) ,+ &%$&,%+ %
)"+
Single gang low voltage bulk cable
mounting bracket designed for easy
installation. Can be installed quickly
using a 3.5” hole saw in 1/4" to 1 1/2"
dry wall. Can also be used with our
28 series designer style wall plates.
;?7@D;A@D:
3.8" W x 5.6"H x 2.0" D
Total Internal Depth: 1 7/8" Measured
from the back of flange
Color: White
)
&,#%*&&'*+0#
# *+) ,+ &%
.##'#+
Plastic dual gang hood designed for
post or retrofit cable installations as
well as for cables with large
connectors. The lower portion of this
bulk wire wall plate is removable so
you can install the plate after the cables
have been installed or connected. Can
be used with our 70-559 or 70-569 low
voltage brackets. Squared single port
for maximum cable capacity. This
retrofit plate is reversible so you can
have the scoop inside or outside of the
wall to suit a variety of needs.
;?7@D;A@D
4.55" W X 4.55" L X 1.75" D
Cable Opening: W 2.975” X H 1.375”
Color: White
)
* %#%*&&'*+0#
# *+) ,+ &%
.##'#+
Plastic single gang hood designed for
post or retrofit cable installations as
well as for cables with large
connectors. The lower portion of this
bulk wire wall plate is removable so
you can install the plate after the
cables have been installed or
connected. Can be used with our
70-558 or 70-568 low voltage
brackets. Squared single port for
maximum cable capacity. This retrofit
plate is reversible so you can have
the scoop inside or outside of the wall
to suit a variety of needs.
;?7@D;A@D
2.87" W X 4.63" L X 1.56" D
Cable Opening: W 1.56” X H .095”
Color: White
"
#"* %#%
# *+) ,+ &%
.##'#+
Plastic single gang hood provides a
versatile method of passing multiple
cables from behind the wall to
equipment. Hoods may be installed
in our 70-558 or 70-568 low voltage
brackets and are compatible with
our 28 series designer style single
and multi gang wall plates. These
hoods may be installed with the
scoop facing in or out of the wall, to
suit a variety of needs.
;?7@D;A@D
W 4.13” X L 1.5” X D 1.5”
Cable Opening: W 1.2” X L 2.3”
Color: Black